June 2009 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Mon Jun 1 00:12:25 EDT 2009
Ending: Tue Jun 30 23:38:43 EDT 2009
Messages: 1155

• [Flexradio] SDR-1000 and SB-200   Jerry Sharp
• [Flexradio] Spurs Every 8 KHz   Ned Johnson
• [Flexradio] FLEX 3000 AND HRD   Les Keppie
• [Flexradio] Retry   Jean-marc BORD
• [Flexradio] Spurs Every 8 KHz   Trevor Smithers
• [Flexradio] VoiceKeyer error, help.   John
• [Flexradio] VoiceKeyer error, help.   Ray Andrews, K9DUR
• [Flexradio] Retry   Lee A Crocker
• [Flexradio] Flex 5000A in the WPX contest and 30 day report   Lee A Crocker
• [Flexradio] Flex 5000A in the WPX contest and 30 day report   Bob McGwier
• [Flexradio] Flexradio3K&5K   Hsu
• [Flexradio] vhf/uhf digital modes and repeater operation   Jim Madden
• [Flexradio] NB/AGC and 6 meters (weak signal and EME operation   kr7o at vhfdx.com
• [Flexradio] Transverters and the Flex-3000   Brahmangou at aol.com
• [Flexradio] Flexradio3K&5K   Tim Ellison
• [Flexradio] vhf/uhf digital modes and repeater operation   Tim Ellison
• [Flexradio] Pwr out (drive) 5000A   w8ikn at yahoo.com
• [Flexradio] Transverters and the Flex-3000   Mark Lunday
• [Flexradio] Pwr out (drive) 5000A   George Steube
• [Flexradio] Flex 5000A in the WPX contest and 30 day report   NZ8J
• [Flexradio] vhf/uhf digital modes and repeater operation   Ted
• [Flexradio] SDR HRD - DM780 Setup   Chris Gerber
• [Flexradio] Pwr out (drive) 5000A   FireBrick
• [Flexradio] Pwr out (drive) 5000A   w8ikn at yahoo.com
• [Flexradio] vhf/uhf digital modes and repeater operation   Tim Ellison
• [Flexradio] Pwr out (drive) 5000A   NU8Z
• [Flexradio] Flex manuals ordered at Dayton   Peter A Markavage
• [Flexradio] Pwr out (drive) 5000A   Steve Nance
• [Flexradio] Control PW-1 Amplifier   Ed Helms
• [Flexradio] Control PW-1 Amplifier   Steve Nance
• [Flexradio] FEX API   Eric Wachsmann
• [Flexradio] Signals in the noise   Eric Wachsmann
• [Flexradio] vhf/uhf digital modes and repeater operation   Woodrick, Ed
• [Flexradio] Just received my Flex 5000A   N4PY2
• [Flexradio] vhf/uhf digital modes and repeater operation   Tim Ellison
• [Flexradio] [SPAM] Just received my Flex 5000A   Tim Ellison
• [Flexradio] vhf/uhf digital modes and repeater operation   Woodrick, Ed
• [Flexradio] vhf/uhf digital modes and repeater operation   Bill Tracey
• [Flexradio] Transverters and the Flex-3000   EAJacobson
• [Flexradio] Pwr out (drive) 5000A   kr7o at vhfdx.com
• [Flexradio] Pwr out (drive) 5000A   Dudley Hurry
• [Flexradio] VFO B Change   Robert Bajuk
• [Flexradio] Vac & PSK31 setup woes   Scott Myers
• [Flexradio] Second receiver shown on Flex-3000 PowerSDR screen   Scott Myers
• [Flexradio] Vac & PSK31 setup woes   Tim Ellison
• [Flexradio] Second receiver shown on Flex-3000 PowerSDR screen   Tim Ellison
• [Flexradio] Frank and Sandy   Bob McGwier
• [Flexradio] Vac & PSK31 setup woes   Dudley Hurry
• [Flexradio] Transverters and the Flex-3000   Paul Radge
• [Flexradio] a future feature - digital mode id displayed on the panadapter   Jim Madden
• [Flexradio] Vac & PSK31 setup woes   Burt
• [Flexradio] Transverters and the Flex-3000   kr7o at vhfdx.com
• [Flexradio] Second receiver shown on Flex-3000 PowerSDR screen   Larry da Ponte
• [Flexradio] vhf/uhf digital modes and repeater operation   Woodrick, Ed
• [Flexradio] Second receiver shown on Flex-3000 PowerSDR screen   Woodrick, Ed
• [Flexradio] Second receiver shown on Flex-3000 PowerSDR screen   Tim Ellison
• [Flexradio] Looking for demo of F3k or 5k in N.E. Ohio   Adam Grossmyer
• [Flexradio] a future feature - digital mode id displayed on the panadapter   Kirk K6KAR
• [Flexradio] a future feature - digital mode id displayed on the panadapter   Ken N9VV
• [Flexradio] vhf/uhf digital modes and repeater operation   Mike Naruta
• [Flexradio] For Flex DXers   FireBrick
• [Flexradio] Power Out and Transverters   Brian C
• [Flexradio] slight delay in voice is gone   FireBrick
• [Flexradio] Suitable laptop????   Dave Gomberg
• [Flexradio] Suitable laptop????   Neal Campbell K3NC
• [Flexradio] [dttsp-linux] Frank and Sandy   José Dumoulin
• [Flexradio] Is it worth the trouble??   Harold Rosee
• [Flexradio] Is it worth the trouble??   Steve Floyd
• [Flexradio] Is it worth the trouble??   Neal Campbell
• [Flexradio] Is it worth the trouble??   Ed Haskell
• [Flexradio] Is it worth the trouble??   Mike Naruta
• [Flexradio] Second receiver shown on Flex-3000 PowerSDR screen   Mark Lunday
• [Flexradio] Second receiver shown on Flex-3000 PowerSDR screen   Tim Ellison
• [Flexradio] Is it worth the trouble??   Brian Lloyd
• [Flexradio] Is it worth the trouble??   Harold Rosee
• [Flexradio] Is it worth the trouble??   Harold Rosee
• [Flexradio] Is it worth the trouble??   Peter Spader
• [Flexradio] Is it worth the trouble??   Jerry Harley
• [Flexradio] Is it worth the trouble??   Al Ward
• [Flexradio] Is it worth the trouble??   Lee A Crocker
• [Flexradio] Vista SP2 for X64 ok so far   Jim Barber
• [Flexradio] vhf/uhf digital modes and repeater operation   Bob McGwier
• [Flexradio] Is it worth the trouble??   Jesse N4BFD
• [Flexradio] Is it worth the trouble??   Bob McGwier
• [Flexradio] Is it worth the trouble??   Tim Ellison
• [Flexradio] vhf/uhf digital modes and repeater operation   Peter G. Viscarola
• [Flexradio] VoiceKeyer error. fixed.   John
• [Flexradio] Is it worth the trouble??   Peter G. Viscarola
• [Flexradio] Is it worth the trouble??   kr7o at vhfdx.com
• [Flexradio] Suitable laptop????   Dudley Hurry
• [Flexradio] Is it worth the trouble??   Charlie Morrison
• [Flexradio] Is it worth the trouble??   K8MLM at aol.com
• [Flexradio] How to force IRQ's (Question)   Steven O'Neal
• [Flexradio] How to force IRQ's (Question)   Brahmangou at aol.com
• [Flexradio] How to force IRQ's (Question)   Steven O'Neal
• [Flexradio] How to force IRQ's (Question)   Mark Lunday
• [Flexradio] How to force IRQ's (Question)   Neal Campbell
• [Flexradio] How to force IRQ's (Question)   Steven O'Neal
• [Flexradio] How to force IRQ's (Question)   N4PY2
• [Flexradio] Is it worth the trouble??   Mark Mumaw
• [Flexradio] How to force IRQ's (Question)   Tim Ellison
• [Flexradio] [SPAM] Re: How to force IRQ's (Question)   Tim Ellison
• [Flexradio] IRQ questin   FireBrick
• [Flexradio] [SPAM] How to force IRQ's (Question)   Tim Ellison
• [Flexradio] [SPAM] IRQ questin   Tim Ellison
• [Flexradio] [SPAM] How to force IRQ's (Question)   Steven O'Neal
• [Flexradio] How to force IRQ's (Question)   Mark Lunday
• [Flexradio] Is it worth the trouble??   w8ikn at yahoo.com
• [Flexradio] Is it worth the trouble??   Dave Gomberg
• [Flexradio] Possibly OT: Any routers that aren't noisy?   Jim Barber
• [Flexradio] CW Skimmer and Flex5000a without VAC   Jerry Flanders
• [Flexradio] vhf/uhf digital modes and repeater operation   Dave Gomberg
• [Flexradio] UCB for SDR5000   Jan Engelen
• [Flexradio] [SPAM] How to force IRQ's (Question)   Brian Lloyd
• [Flexradio] using the second receiver to monitor transmitted audio   Jim Madden
• [Flexradio] using the second receiver to monitor transmitted audio   Jerry Flanders
• [Flexradio] sdr1000 - mage rejection - our yesterday morning telecom.   K4LCD
• [Flexradio] Second receiver shown on Flex-3000 PowerSDR screen   Scott Myers
• [Flexradio] Possibly OT: Any routers that aren't noisy?   MILLER, Tom
• [Flexradio] Possibly OT: Any routers that aren't noisy?   W5CUL
• [Flexradio] Second receiver shown on Flex-3000 PowerSDR screen   Scott Myers
• [Flexradio] Vac & PSK31 setup woes   Scott Myers
• [Flexradio] Second receiver shown on Flex-3000 PowerSDR screen   Scott Myers
• [Flexradio] Second receiver shown on Flex-3000 PowerSDR screen   Tim Ellison
• [Flexradio] maybe someone has an idea why this happens   FireBrick
• [Flexradio] [SPAM] maybe someone has an idea why this happens   Tim Ellison
• [Flexradio] Possibly OT: Any routers that aren't noisy?   Rob Sherwood
• [Flexradio] maybe someone has an idea why this happens   Eddy Van de Velde
• [Flexradio] maybe someone has an idea why this happens   Simon (HB9DRV)
• [Flexradio] [SPAM] maybe someone has an idea why this happens   Steve Nance
• [Flexradio] Second receiver shown on Flex-3000 PowerSDR screen   Larry da Ponte
• [Flexradio] Second receiver shown on Flex-3000 PowerSDR screen   Scott Myers
• [Flexradio] Possibly OT: Any routers that aren't noisy?   Jim Barber
• [Flexradio] sdr1000 - mage rejection - our yesterday morning telecom.   Dudley Hurry
• [Flexradio] Keying an amp   Bob Maser
• [Flexradio] test   STORMYX
• [Flexradio] F5ka and PSK   John
• [Flexradio] My Flex works great.   Steve Weisbrod
• [Flexradio] F5ka and PSK   Jerry Flanders
• [Flexradio] F5ka and PSK   Neal Campbell
• [Flexradio] [SPAM] F5ka and PSK   Tim Ellison
• [Flexradio] Any Details on Flex 1500 leaking out?   Steven O'Neal
• [Flexradio] [SPAM] Any Details on Flex 1500 leaking out?   Tim Ellison
• [Flexradio] Any Details on Flex 1500 leaking out?   James E McClellan
• [Flexradio] [SPAM] Any Details on Flex 1500 leaking out?   Steven O'Neal
• [Flexradio] Any Details on Flex 1500 leaking out?   James E McClellan
• [Flexradio] Any Details on Flex 1500 leaking out?   Steven O'Neal
• [Flexradio] [SPAM] Any Details on Flex 1500 leaking out?   Neal Campbell
• [Flexradio] Any Details on Flex 1500 leaking out?   Steven O'Neal
• [Flexradio] i think my flex 5000 transmitter has died...   Jim Madden
• [Flexradio] [SPAM] Any Details on Flex 1500 leaking out?   Steven O'Neal
• [Flexradio] how does one initiate a reply to a posted message ...   Jim Madden
• [Flexradio] Any Details on Flex 1500 leaking out?   Tim Ellison
• [Flexradio] how does one initiate a reply to a posted message ...   Tim Ellison
• [Flexradio] [SPAM] Any Details on Flex 1500 leaking out?   Tim Ellison
• [Flexradio] Any Details on Flex 1500 leaking out?   Brahmangou at aol.com
• [Flexradio] please pretend that the posting about my transmitter dying never occurred..   Jim Madden
• [Flexradio] i think my flex 5000 transmitter has died...   Dudley Hurry
• [Flexradio] Flex-1500   Steven L Hess
• [Flexradio] "Flex Finger"   Jim Menefee
• [Flexradio] [SPAM] Any Details on Flex 1500 leaking out?   Jim R
• [Flexradio] General question about VAC   jmbord at teaser.fr
• [Flexradio] VAC PTT   Burt
• [Flexradio] General question about VAC   Tim Ellison
• [Flexradio] VAC PTT   Tim Ellison
• [Flexradio] General question about VAC   Woodrick, Ed
• [Flexradio] VAC PTT   Woodrick, Ed
• [Flexradio] Any Details on Flex 1500 leaking out?   Tim Ellison
• [Flexradio] "Flex Finger"   Kevin Hobbs
• [Flexradio] VAC PTT   Tim Ellison
• [Flexradio] [SPAM] Any Details on Flex 1500 leaking out?   Al Ward
• [Flexradio] VAC PTT   Dave Burnett
• [Flexradio] [SPAM] Any Details on Flex 1500 leaking out?   Tim Ellison
• [Flexradio] [SPAM] Any Details on Flex 1500 leaking out?   Al Ward
• [Flexradio] "Flex Finger"   Eric Wachsmann
• [Flexradio] Lost CPU %   kr7o at vhfdx.com
• [Flexradio] VAC PTT   Larry da Ponte
• [Flexradio] I did it!   Harold Rosee
• [Flexradio] "Flex Finger"   Joe Roth-WC4R
• [Flexradio] Lost CPU %   hartfuss
• [Flexradio] Lost CPU %   Tim Ellison
• [Flexradio] FlexRadio Digest, Vol 50, Issue 4   Chris Gerber
• [Flexradio] FlexRadio Digest, Vol 50, Issue 4   Chris Gerber
• [Flexradio] FlexRadio Digest, Vol 50, Issue 4   Tim Ellison
• [Flexradio] No TX with DXLab WW PSK31   vtnn43e at comcast.net
• [Flexradio] Transverters   Bill Tynan
• [Flexradio] Transverters   Al Ward
• [Flexradio] Transverters   Al Ward
• [Flexradio] Amp Keying and chopped key elements   N4PY2
• [Flexradio] No TX with DXLab WW PSK31   Tim Ellison
• [Flexradio] WBIR, wideband image rejection   Robert McGwier
• [Flexradio] status of pre-order sales of 3000 to EU?   Joze Kovacic
• [Flexradio] 5000   STORMYX
• [Flexradio] SVN question Re: getting earlier editions of files   Jerry Flanders
• [Flexradio] Amp Keying and chopped key elements   Robert McGwier
• [Flexradio] 5000   STORMYX
• [Flexradio] SVN question Re: getting earlier editions of files   Tim Ellison
• [Flexradio] No TX with DXLab WW PSK31   Jack Haverty
• [Flexradio] WBIR, wideband image rejection   Dave Muskopf
• [Flexradio] Confessions from a Flexer   Frank
• [Flexradio] high floor noise   yash at aol.com
• [Flexradio] high floor noise   Tim (W4TME)
• [Flexradio] vhf/uhf digital modes and repeater operation   Woodrick, Ed
• [Flexradio] "Flex Finger"   Lee A Crocker
• [Flexradio] Amp Keying and chopped key elements   Dale Boresz
• [Flexradio] Seeking system level documentation on Power SDR and 5000A   Robert Jefferis
• [Flexradio] How to force IRQ's (Question)   Steven O'Neal
• [Flexradio] CPU percent lost   Dale Brown
• [Flexradio] [SPAM] Re: How to force IRQ's (Question)   Tim Ellison
• [Flexradio] [SPAM] Re: How to force IRQ's (Question)   Steven O'Neal
• [Flexradio] [SPAM] Re: How to force IRQ's (Question)   Tim Ellison
• [Flexradio] 5000   Jim R
• [Flexradio] transmitter power loss mystery solved...   Jim Madden
• [Flexradio] F5KA and PSK   John
• [Flexradio] [SPAM] F5KA and PSK   Tim Ellison
• [Flexradio] key speed   Ed Helms
• [Flexradio] key speed   Neal Campbell
• [Flexradio] ALC, DX, CPDR Fixes on SVN   john_eckert at agilent.com
• [Flexradio] ALC, DX, CPDR Fixes on SVN   Paul20
• [Flexradio] ALC, DX, CPDR Fixes on SVN   Tim Ellison
• [Flexradio] level calibration questions-SDR-1000   yash at aol.com
• [Flexradio] level calibration questions-SDR-1000   Eric Wachsmann
• [Flexradio] ALC, DX, CPDR Fixes on SVN   Paul20
• [Flexradio] VOX + VAC   Eric Wachsmann
• [Flexradio] ALC, DX, CPDR Fixes on SVN   Jesse N4BFD
• [Flexradio] 5000-THANKS-   STORMYX
• [Flexradio] level calibration questions-SDR-1000   n3evl
• [Flexradio] level calibration questions-SDR-1000   Eric Wachsmann
• [Flexradio] Increased receive noise level on 6M after CW Transmit   Clay W7CE
• [Flexradio] Increased receive noise level on 6M after CW Transmit   Harry Williams
• [Flexradio] [SPAM] Increased receive noise level on 6M after CW Transmit   Tim Ellison
• [Flexradio] Increased receive noise level on 6M after CW Transmit   Mike - KM0T
• [Flexradio] Increased receive noise level on 6M after CWTransmit   Clay W7CE
• [Flexradio] VOX + VAC   Mark Mumaw
• [Flexradio] [SPAM] Re: VOX + VAC   Tim Ellison
• [Flexradio] any tip for noise from plasma tv?   elan paim
• [Flexradio] any tip for noise from plasma tv?   Ed Toal
• [Flexradio] any tip for noise from plasma tv?   Tim Ellison
• [Flexradio] any tip for noise from plasma tv?   Tim Ellison
• [Flexradio] Antenna Switching Times   Don Sachnoff
• [Flexradio] 6 Meters, SDR-5000A Vs SDR-3000   Dave&Nancy Ridge
• [Flexradio] Antenna Switching Times   Eric Wachsmann
• [Flexradio] CWX is not working correctly   Bernd Schnell
• [Flexradio] ALC, DX, CPDR Fixes on SVN   john_eckert at agilent.com
• [Flexradio] VOX + VAC   Mark Mumaw
• [Flexradio] [SPAM] Re: VOX + VAC   Tim Ellison
• [Flexradio] Java-SDR question   Deane Blazie
• [Flexradio] [OT] Anyone using nGenLog for logging?   Tim Ellison
• [Flexradio] ALC, DX, CPDR Fixes on SVN   Paul20
• [Flexradio] [SPAM] Re: VOX + VAC   Mark Mumaw
• [Flexradio] [SPAM] RE: [SPAM] Re: VOX + VAC   Tim Ellison
• [Flexradio] Antenna Switching Times   Don Sachnoff
• [Flexradio] Antenna Switching Times   Bob Tracy
• [Flexradio] Re Increased Noise Llevel on 6 Meters   Bill Tynan
• [Flexradio] Speech Recognition and PowerSDR   David Beumer W0DHB
• [Flexradio] Speech Recognition and PowerSDR   Dave Gomberg
• [Flexradio] Speech Recognition and PowerSDR   N4PY2
• [Flexradio] Image calb. for sdr-1000   yash at aol.com
• [Flexradio] Image calb. for sdr-1000   Tim Ellison
• [Flexradio] Palm Paddle and Code Cube   Pete Zawasky
• [Flexradio] Palm Paddle and Code Cube   Brian Lloyd
• [Flexradio] Palm Paddle and Code Cube   Pete Zawasky
• [Flexradio] SVN 2797 SDR-1000   Frank Mayer
• [Flexradio] any tip for noise from plasma tv?   MILLER, Tom
• [Flexradio] any tip for noise from plasma tv?   Howard S. White
• [Flexradio] Palm Paddle and Code Cube   Lee A Crocker
• [Flexradio] Lightning? stopped PWSDR   FireBrick
• [Flexradio] Lightning? stopped PWSDR   Ed Toal
• [Flexradio] Lightning? stopped PWSDR   FireBrick
• [Flexradio] Lightning? stopped PWSDR   Bret Mills
• [Flexradio] Lightning? stopped PWSDR   Tim Ellison
• [Flexradio] Lightning? stopped PWSDR   Frank Mayer
• [Flexradio] SVN 2797 SDR-1000   Frank Mayer
• [Flexradio] question about cabeling a 6 meter preamp into the circuit   FireBrick
• [Flexradio] remote control of power on off   Harry Hahn
• [Flexradio] [SPAM] question about cabeling a 6 meter preamp into the circuit   Tim Ellison
• [Flexradio] question about cabeling a 6 meter preamp into thecircuit   Clay W7CE
• [Flexradio] Lightning? stopped PWSDR   Edwin Marzan
• [Flexradio] SVN 2797 SDR-1000   EB4APL
• [Flexradio] 6 meter preamp calbes   FireBrick
• [Flexradio] Well I did it!   Bill Nicolson
• [Flexradio] Well I did it!   Howard S. White
• [Flexradio] Save split frequencies in memories?   vtnn43e at comcast.net
• [Flexradio] remote control of power on off   Lee A Crocker
• [Flexradio] svn 3162 TEST version is HOT   FireBrick
• [Flexradio] SVN 2797 SDR-1000   Frank Mayer
• [Flexradio] User Files   Kevin Hobbs
• [Flexradio] User Files   Simon (HB9DRV)
• [Flexradio] User Files   Kevin Hobbs
• [Flexradio] User Files   Simon (HB9DRV)
• [Flexradio] User Files   Tim Ellison
• [Flexradio] SVN 2797 SDR-1000   EB4APL
• [Flexradio] SVN 2797 SDR-1000   Tim Ellison
• [Flexradio] CW keyer sidetone?   Geep Howell
• [Flexradio] Windows XP Pro   Bruce Mills - KL7JDR
• [Flexradio] Windows XP Pro   Peter G. Viscarola
• [Flexradio] Windows XP Pro   Tim Ellison
• [Flexradio] Windows XP Pro   Dave Gomberg
• [Flexradio] 5000A es XP Home   STORMYX
• [Flexradio] 5000A es XP Home   Neal Campbell
• [Flexradio] 5000A es XP Home   Steve Floyd
• [Flexradio] CW keyer sidetone?   Geep Howell
• [Flexradio] 5000A es XP Home   Simon (HB9DRV)
• [Flexradio] 5000A es XP Home   Eric Wachsmann
• [Flexradio] 5000A es XP Home   Simon (HB9DRV)
• [Flexradio] 5000A es XP Home   Peter G. Viscarola
• [Flexradio] 5000A es XP Home   N4PY2
• [Flexradio] CW keyer sidetone?   N4PY2
• [Flexradio] CW keyer sidetone?   Geep Howell
• [Flexradio] 5000A es XP Home   k6xr
• [Flexradio] Windows XP Pro   Brian Lloyd
• [Flexradio] 5000A es XP Home   Brian Lloyd
• [Flexradio] Windows XP Pro   Dudley Hurry
• [Flexradio] Lost CPU %   kr7o at vhfdx.com
• [Flexradio] 9 khz IF in F5K   N4PY
• [Flexradio] 9 khz IF in F5K   Eric Wachsmann
• [Flexradio] HRD..MIXW Help   Steven O'Neal
• [Flexradio] [SPAM] HRD..MIXW Help   Tim Ellison
• [Flexradio] [SPAM] HRD..MIXW Help   Steven O'Neal
• [Flexradio] [SPAM] HRD..MIXW Help   Tim Ellison
• [Flexradio] Vista 64-bit?   Jim Manner
• [Flexradio] Vista 64-bit?   Tim Ellison
• [Flexradio] Vista 64-bit?   Jim Manner
• [Flexradio] v1.19.0 PB vs 1.19.1   Joe Roth-WC4R
• [Flexradio] Windows XP Pro   Dave Gomberg
• [Flexradio] Windows XP Pro   Tim Ellison
• [Flexradio] [SPAM] v1.19.0 PB vs 1.19.1   Tim Ellison
• [Flexradio] Windows XP Pro   Jack Haverty
• [Flexradio] Windows XP Pro   Jerry Flanders
• [Flexradio] 5000   STORMYX
• [Flexradio] 5000   Tim Ellison
• [Flexradio] Windows XP Pro   Jack Haverty
• [Flexradio] FW: Tokyo HyPower   Dave Gomberg
• [Flexradio] FW: Tokyo HyPower   Bob Tracy
• [Flexradio] Windows XP Pro   Alfred Green
• [Flexradio] 5000   FireBrick
• [Flexradio] Writelog setup at my QTH   Geep Howell
• [Flexradio] Writelog setup at my QTH   Bob Tracy
• [Flexradio] Windows XP Pro   Dave Gomberg
• [Flexradio] 5000 digital   STORMYX
• [Flexradio] Windows XP Pro   Brian Lloyd
• [Flexradio] Windows XP Pro   Tim Ellison
• [Flexradio] 5000   STORMYX
• [Flexradio] 5000   Tim Ellison
• [Flexradio] FW: Tokyo HyPower   Dave Gomberg
• [Flexradio] FW: Tokyo HyPower   N4PY2
• [Flexradio] unaticipated host error   FireBrick
• [Flexradio] [SPAM] unaticipated host error   Tim Ellison
• [Flexradio] 5000   Mike Naruta
• [Flexradio] unanticipated host error   Dave Gomberg
• [Flexradio] SVN error   Jerry Harley
• [Flexradio] SVN error   Tim Ellison
• [Flexradio] 5000 digital   STORMYX
• [Flexradio] 5000 digital   STORMYX
• [Flexradio] WSJT and PowerSDR using VAC   Phil Theis
• [Flexradio] WSJT and PowerSDR using VAC   Tim Ellison
• [Flexradio] WSJT and PowerSDR using VAC   Phil Theis
• [Flexradio] Another WSJT question   kr7o at vhfdx.com
• [Flexradio] 5000 dig   STORMYX
• [Flexradio] Another WSJT question   Tim Ellison
• [Flexradio] WSJT and PowerSDR using VAC   Tim Ellison
• [Flexradio] WSJT and PowerSDR using VAC   Phil Theis
• [Flexradio] PowerSDR Data Transfer Utility update?   Ray Andrews, K9DUR
• [Flexradio] [SPAM] HRD..MIXW Help   Steven O'Neal
• [Flexradio] [SPAM] HRD..MIXW Help   Tim Ellison
• [Flexradio] AM band filter?   Joe Roth-WC4R
• [Flexradio] [SPAM] HRD..MIXW Help   Steven O'Neal
• [Flexradio] AM band filter?   N4PY2
• [Flexradio] F3K ATU dead after first failed attempt to find a match.   Larry da Ponte
• [Flexradio] Laptop for the Flex 1500   Jerry Harley
• [Flexradio] Laptop for the Flex 1500   Tim Ellison
• [Flexradio] Laptop for the Flex 1500   Geep Howell
• [Flexradio] WSJT and PowerSDR using VAC   Al K0VM
• [Flexradio] Phantom signals on 6M   vtnn43e at comcast.net
• [Flexradio] N4PY Version for Flex Radios Now Available   N4PY2
• [Flexradio] Phantom signals on 6M   Jan Egholm
• [Flexradio] N4py   STORMYX
• [Flexradio] Phantom signals on 6M   Tim Ellison
• [Flexradio] Phantom signals on 6M   vtnn43e at comcast.net
• [Flexradio] Best practice to use 2nd rx to monitor transmit audio?   Mark M0MRR
• [Flexradio] Phantom signals on 6M   Jan Egholm
• [Flexradio] AM band filter?   N4PY2
• [Flexradio] PowerSDR screen location   N4PY2
• [Flexradio] PowerSDR screen location   FireBrick
• [Flexradio] [SPAM] PowerSDR screen location   Tim Ellison
• [Flexradio] [SPAM] Re: AM band filter?   Tim Ellison
• [Flexradio] [SPAM] PowerSDR screen location   N4PY2
• [Flexradio] Pretty Betty   Stig LA4WAA
• [Flexradio] [SPAM] PowerSDR screen location   Stan
• [Flexradio] Pretty Betty   Tim Ellison
• [Flexradio] PowerSDR screen location   Duane - N9DG
• [Flexradio] Loss of Image Rejection After TX in Test Branch   claver at comcast.net
• [Flexradio] Loss of Image Rejection After TX in Test Branch   Tim Ellison
• [Flexradio] 5000   STORMYX
• [Flexradio] PowerSDR screen location   Neal Campbell
• [Flexradio] FLEX-3000 Shipping Time   Bob Dianetti
• [Flexradio] [SPAM] PowerSDR screen location   k4elo at fastmail.fm
• [Flexradio] FLEX-3000 Shipping Time   Mark Lunday
• [Flexradio] Where is 1.18.1?   Steve Kallal
• [Flexradio] Laptop for the Flex 1500   Brian Lloyd
• [Flexradio] Flex-5000A and PowerSDR v1.18.0 do not find together ...   Frank Goenninger
• [Flexradio] Where is 1.18.1?   Tim Ellison
• [Flexradio] Where is 1.18.1?   Steven O'Neal
• [Flexradio] FLEX-3000 Shipping Time   Steven O'Neal
• [Flexradio] FLEX-3000 Shipping Time   Steven O'Neal
• [Flexradio] Where is 1.18.1?   Steve Kallal
• [Flexradio] Wanted flex 1000   elan paim
• [Flexradio] Where is 1.18.1?   Tim Ellison
• [Flexradio] 5000 1.18.1 SVN 3166   STORMYX
• [Flexradio] Searchprotocolho   N4PY2
• [Flexradio] Searchprotocolho   Neal Campbell
• [Flexradio] Wanted flex 1000 100W ONLY   elan paim
• [Flexradio] Searchprotocolho   K4CY at comcast.net
• [Flexradio] [SPAM] Searchprotocolho   Tim Ellison
• [Flexradio] Searchprotocolho   Tim Ellison
• [Flexradio] Intermittent Gain   Phil Theis
• [Flexradio] Searchprotocolho   Neal Campbell
• [Flexradio] Searchprotocolho   Jim Jerzycke
• [Flexradio] Flex-5000A and PowerSDR v1.18.0 do not find together ...   jhurry at austin.rr.com
• [Flexradio] Flex 3000 Operating Temps Question   Steven O'Neal
• [Flexradio] Flex 3000 Operating Temps Question   Brian Lloyd
• [Flexradio] Flex-5000A and PowerSDR v1.18.0 do not find together ...   Frank Goenninger
• [Flexradio] Flex-5000A and PowerSDR v1.18.0 do not find together ...   Neal Campbell
• [Flexradio] [SPAM] Flex 3000 Operating Temps Question   Tim Ellison
• [Flexradio] Flex-5000A and PowerSDR v1.18.0 do not find together ...   Tim Ellison
• [Flexradio] Flex-5000A and PowerSDR v1.18.0 do not find together ...   Tim Ellison
• [Flexradio] [SPAM] Flex 3000 Operating Temps Question   Steven O'Neal
• [Flexradio] man, thought I was going nuts   FireBrick
• [Flexradio] Test Branch SVN 3166 improved QSK?   John Sweeney
• [Flexradio] Flex-5000A and PowerSDR v1.18.0 do not find together ...   Brian Lloyd
• [Flexradio] Searchprotocolho   Bob McGwier
• [Flexradio] Test Branch SVN 3166 improved QSK?   NZ8J
• [Flexradio] Test Branch SVN 3166 improved QSK?   David Beumer W0DHB
• [Flexradio] Test Branch SVN 3166 improved QSK?   FireBrick
• [Flexradio] Flex-5000A and PowerSDR v1.18.0 do not find together ...   Dudley Hurry
• [Flexradio] Test Branch SVN 3166 improved QSK?   Bret Mills
• [Flexradio] Test Branch SVN 3166 improved QSK?   John Sweeney
• [Flexradio] 5000 digital   STORMYX
• [Flexradio] 5000 digital   FireBrick
• [Flexradio] Low level whine Flex 5K   NZ8J
• [Flexradio] Low level whine Flex 5K   N4PY2
• [Flexradio] [SPAM] Re: Low level whine Flex 5K   Tim Ellison
• [Flexradio] Low level whine Flex 5K   Robert Jefferis
• [Flexradio] Flex-5000   MILLER, Tom
• [Flexradio] Flex-5000   Dudley Hurry
• [Flexradio] Flex-5000A Line in VOX operation?   NJ1H
• [Flexradio] Flex-5000   Clay W7CE
• [Flexradio] FLEX3000 in the ARRL VHF+ contest.   Alfred Green
• [Flexradio] Flex-5000A and PowerSDR v1.18.0 do not find together ...   Frank Goenninger
• [Flexradio] Flex-5000A and PowerSDR v1.18.0 do not find together ...   Frank Goenninger
• [Flexradio] Flex-5000A and PowerSDR v1.18.0 do not find together ...   Frank Goenninger
• [Flexradio] Flex-5000A and PowerSDR v1.18.0 do not find together ...   Tim Ellison
• [Flexradio] Flex-5000A and PowerSDR v1.18.0 do not find together ...   Dave Gomberg
• [Flexradio] Flex-5000A and PowerSDR v1.18.0 do not find together ...   Neal Campbell
• [Flexradio] Flex-5000A and PowerSDR v1.18.0 do not find together ...   Tim Ellison
• [Flexradio] F5K, first operations and 6M test   kr7o at vhfdx.com
• [Flexradio] F5K, first operations and 6M test   MILLER, Tom
• [Flexradio] Flex-5000A and PowerSDR v1.18.0 do not find together ...   Frank Goenninger
• [Flexradio] Flex-5000A and PowerSDR v1.18.0 do not find together ...   Tim Ellison
• [Flexradio] Optimizing DSP for Digital and other modes   Scott Myers
• [Flexradio] F5K, first operations and 6M test   Brian Lloyd
• [Flexradio] F5K, first operations and 6M test   Jerry Flanders
• [Flexradio] F5K, first operations and 6M test   Sanger, Joseph
• [Flexradio] F5K, first operations and 6M test   Jerry Flanders
• [Flexradio] Flex-5000A Line in VOX operation?   Al K0VM
• [Flexradio] Flex-5000A Line in VOX operation?   NJ1H
• [Flexradio] F5K, first operations and 6M test   kr7o at vhfdx.com
• [Flexradio] Flex 5K with Palstar AT-AUTO Tuner   Mario Aviles
• [Flexradio] Mario Flex & Palstar   FireBrick
• [Flexradio] F5K, first operations and 6M test   Brian Lloyd
• [Flexradio] New eHam SDR survey   Duane - N9DG
• [Flexradio] Click tuning with a Locked panadapter operatation   Al K0VM
• [Flexradio] Click tuning with a Locked panadapter operatation   N4PY2
• [Flexradio] Logger32   w1fc at aol.com
• [Flexradio] New eHam SDR survey   Jim Jerzycke
• [Flexradio] Logger32   Tim Ellison
• [Flexradio] New eHam SDR survey   Tim Ellison
• [Flexradio] New eHam SDR survey   Neal Campbell
• [Flexradio] Logger32   Jerry Flanders
• [Flexradio] New eHam SDR survey   Burt
• [Flexradio] New eHam SDR survey   Jim Manner
• [Flexradio] New eHam SDR survey   BILL GUYGER
• [Flexradio] Click tuning with a Locked panadapter operatation   Kirk K6KAR
• [Flexradio] Flex 3000 and RTTY   jim
• [Flexradio] New eHam SDR survey   radioart at frontiernet.net
• [Flexradio] Flex 3000 and RTTY   Tim Ellison
• [Flexradio] Flex 3000 and RTTY   Neal Campbell
• [Flexradio] Flex 3000 and RTTY   FireBrick
• [Flexradio] 6 METERS   FireBrick
• [Flexradio] ooops typos   FireBrick
• [Flexradio] the survey   Burt
• [Flexradio] Click tuning with a Locked panadapter operatation   Gerald Youngblood
• [Flexradio] Flex 3000 and RTTY   Brian Lloyd
• [Flexradio] Flex 3000 and RTTY   Tim Ellison
• [Flexradio] Click tuning with a Locked panadapter operatation   David Beumer W0DHB
• [Flexradio] the survey/very low audio   Burt
• [Flexradio] Test Branch SVN 3166 improved QSK?   knesbitt
• [Flexradio] Click tuning with a Locked panadapter operatation   Jim R
• [Flexradio] Click tuning with a Locked panadapter operatation   Clay W7CE
• [Flexradio] Flex 3000 and RTTY   Ron Kolarik
• [Flexradio] Dilemma   Ray Andrews, K9DUR
• [Flexradio] Dilemma   FireBrick
• [Flexradio] Dilemma   Tim Ellison
• [Flexradio] Click tuning with a Locked panadapter operatation   Ray Andrews, K9DUR
• [Flexradio] Dropouts   FireBrick
• [Flexradio] Flex 3000 and RTTY   Tim Ellison
• [Flexradio] Dilemma   José Dumoulin
• [Flexradio] Click tuning with a Locked panadapter operatation   Sanger, Joseph
• [Flexradio] I mispoke   FireBrick
• [Flexradio] Test Branch SVN 3166 improved QSK?   Bob McGwier
• [Flexradio] Test Branch SVN 3166 improved QSK?   Bob McGwier
• [Flexradio] Dilemma   Bob McGwier
• [Flexradio] Click tuning with a Locked panadapter operatation   Bob McGwier
• [Flexradio] September release   Joe Roth-WC4R
• [Flexradio] Flex 3000 and RTTY   Dale Boresz
• [Flexradio] Flex 3000 and RTTY   Dale Boresz
• [Flexradio] Flex 3000 and RTTY   Tim Ellison
• [Flexradio] Life expectancy of the relays in the 5K?   John Sweeney
• [Flexradio] Life expectancy of the relays in the 5K?   Tim Ellison
• [Flexradio] Life expectancy of the relays in the 5K?   Tim Cook
• [Flexradio] Test Branch SVN 3166 improved QSK?   Brian Lloyd
• [Flexradio] Test Branch SVN 3166 improved QSK?   Tim Ellison
• [Flexradio] Click tuning with a Locked panadapter operatation   Brian Lloyd
• [Flexradio] Click tuning with a Locked panadapter operatation   Alfred Green
• [Flexradio] All using SVN 3166 or higher   Dudley Hurry
• [Flexradio] Flex 3000 and RTTY   Neal Campbell K3NC
• [Flexradio] thanks for the baseline pumping fix   FireBrick
• [Flexradio] Click tuning with a Locked panadapter operatation   Duane - N9DG
• [Flexradio] Suggested Solution to RIT Focus?   Mack
• [Flexradio] [SPAM] Suggested Solution to RIT Focus?   Tim Ellison
• [Flexradio] September release   Mike Naruta
• [Flexradio] thanks for the baseline pumping fix   Brian Lloyd
• [Flexradio] Click tuning with a Locked panadapter operatation   Scott McClements
• [Flexradio] Click tuning with a Locked panadapter operatation   Scott McClements
• [Flexradio] Click tuning with a Locked panadapter operatation   k4elo at fastmail.fm
• [Flexradio] All using SVN 3166 or higher   Ross Stenberg
• [Flexradio] Optimizing DSP for Digital and other modes   Eric Wachsmann
• [Flexradio] thanks for the baseline pumping fix   Ross Stenberg
• [Flexradio] windows 7 blog   Steve Jones
• [Flexradio] All using SVN 3166 or higher   Bob McGwier
• [Flexradio] Test SVN 3171 fails RX image & level calibration   Dave
• [Flexradio] Life expectancy of the relays in the 5K?   Gerald Youngblood
• [Flexradio] Click tuning with a Locked panadapter operatation   Duane - N9DG
• [Flexradio] All using SVN 3166 or higher   Joe Roth-WC4R
• [Flexradio] Re Flex 3K vs Flex 5K on 6 Meters   Bill Tynan
• [Flexradio] 6 meters hot tonight   Geep Howell
• [Flexradio] 6 meters hot tonight   Tim Ellison
• [Flexradio] 6 meters hot tonight   k4elo at fastmail.fm
• [Flexradio] 6 meters hot tonight   Jesse N4BFD
• [Flexradio] 6 meters hot tonight   Dennis Petrich
• [Flexradio] Click tuning with a Locked panadapter operatation   Chad Gatesman
• [Flexradio] monitoring not working for me   Jim
• [Flexradio] Flex5KA, MixW and HRD - PTT Help   Tom O'Boyle
• [Flexradio] All using SVN 3166 or higher   Robert McGwier
• [Flexradio] Logger32   Mark Gang
• [Flexradio] All using SVN 3166 or higher   Kirk K6KAR
• [Flexradio] Flex5KA, MixW and HRD - PTT Help   Burt
• [Flexradio] Flex5KA, MixW and HRD - PTT Help   Tim Ellison
• [Flexradio] monitoring not working for me   Tim Ellison
• [Flexradio] Logger32   Steve Nance
• [Flexradio] monitoring not working for me   Jim
• [Flexradio] All using SVN 3166 or higher   Gerald Youngblood
• [Flexradio] Life expectancy of the relays in the 5K?   Gerald Youngblood
• [Flexradio] Click tuning with a Locked panadapter operatation   Mark Mumaw
• [Flexradio] Flex5KA, MixW and HRD - PTT Help   k1oik at yahoo.com
• [Flexradio] All using SVN 3166 or higher   Brian Lloyd
• [Flexradio] Life expectancy of the relays in the 5K?   Burt
• [Flexradio] Flex5KA, MixW and HRD - PTT Help   Robert McGwier
• [Flexradio] All using SVN 3166 or higher   Jesse N4BFD
• [Flexradio] Life expectancy of the relays in the 5K?   Robert McGwier
• [Flexradio] All using SVN 3166 or higher   Dave Gomberg
• [Flexradio] All using SVN 3166 or higher   Bret Mills
• [Flexradio] All using SVN 3166 or higher   Carl, WCØV
• [Flexradio] RX1, RX2, VAC, and audio output   Brian Lloyd
• [Flexradio] All using SVN 3166 or higher   Jack Haverty
• [Flexradio] RX1, RX2, VAC, and audio output   Jerry Flanders
• [Flexradio] Processor   MILLER, Tom
• [Flexradio] Processor   Tim Ellison
• [Flexradio] FlexRadio Digest, Vol 50, Issue 18   Mark Amos
• [Flexradio] All using SVN 3166 or higher   Mike Naruta
• [Flexradio] All using SVN 3166 or higher   Gerald Youngblood
• [Flexradio] All using SVN 3166 or higher   Peter G. Viscarola
• [Flexradio] All using SVN 3166 or higher   k5nwa
• [Flexradio] All using SVN 3166 or higher   Gerald Youngblood
• [Flexradio] Question abt Demo mode   jim
• [Flexradio] WOO HOO! F3K arrives next Tue   Mark Lunday
• [Flexradio] Receiver Quieting?   Ernie Stedman
• [Flexradio] All using SVN 3166 or higher   Dave Gomberg
• [Flexradio] Question abt Demo mode   Tim Ellison
• [Flexradio] All using SVN 3166 or higher   Howard S. White
• [Flexradio] All using SVN 3166 or higher   Burt
• [Flexradio] All using SVN 3166 or higher   Brian Lloyd
• [Flexradio] All using SVN 3166 or higher   Brian Lloyd
• [Flexradio] 5000A   STORMYX
• [Flexradio] Alpha Code Discussions   Brian C
• [Flexradio] All using SVN 3166 or higher   k4elo at fastmail.fm
• [Flexradio] All using SVN 3166 or higher   Brian Lloyd
• [Flexradio] Remote Operation   Ed Helms
• [Flexradio] SDR-1000 For Sale   Bob Tracy
• [Flexradio] 1.18.1 up   Geep Howell
• [Flexradio] (no subject)   Mike King
• [Flexradio] Flex5KA, MixW and HRD - PTT Help   Tom O'Boyle
• [Flexradio] Processor   Steven O'Neal
• [Flexradio] CRT monitor RFI   William MacCracken
• [Flexradio] CRT monitor RFI   Steven O'Neal
• [Flexradio] mobile sdr and a complete spectrum display   Jim
• [Flexradio] mobile sdr and a complete spectrum display   Jim
• [Flexradio] CRT monitor RFI   Tim Ellison
• [Flexradio] mobile sdr and a complete spectrum display   Lee A Crocker
• [Flexradio] mobile sdr and a complete spectrum display   Tim Ellison
• [Flexradio] mobile sdr and a complete spectrum display   Dave
• [Flexradio] Fix for Hotwheel with Latest Version of PowerSDR   Mack
• [Flexradio] Processor   Ed Haskell
• [Flexradio] All using SVN 3166 or higher   Ed Haskell
• [Flexradio] mobile sdr and a complete spectrum display   Ray Andrews, K9DUR
• [Flexradio] mobile sdr and a complete spectrum display   Philip Covington
• [Flexradio] mobile sdr and a complete spectrum display   Jim
• [Flexradio] All using SVN 3166 or higher   Gerald Youngblood
• [Flexradio] mobile sdr and a complete spectrum display   Jim
• [Flexradio] mobile sdr and a complete spectrum display   Jim
• [Flexradio] mobile sdr and a complete spectrum display   Tim Ellison
• [Flexradio] mobile sdr and a complete spectrum display   Philip Covington
• [Flexradio] v1.18.1   Joe Roth-WC4R
• [Flexradio] Flex5KA, MixW and HRD - PTT Help   Dudley Hurry
• [Flexradio] All using SVN 3166 or higher   Gerald Youngblood
• [Flexradio] 1.18.1 calibration error   vtnn43e at comcast.net
• [Flexradio] All using SVN 3166 or higher   Peter Spader
• [Flexradio] 1.18.1 calibration error   Tim Ellison
• [Flexradio] mobile sdr and a complete spectrum display   Ray Andrews, K9DUR
• [Flexradio] v1.18.1 PTT ticked off   Burt
• [Flexradio] v1.18.1 PTT ticked off   Tim Ellison
• [Flexradio] mobile sdr and a complete spectrum display   Tim Ellison
• [Flexradio] PowerSDR(TM) v1.8.1 Official Release   Gerald Youngblood
• [Flexradio] PowerSDR1.18.1 startup error   Dudley Hurry
• [Flexradio] v1.18.1 PTT ticked off   Jesse N4BFD
• [Flexradio] Processor   Brian Lloyd
• [Flexradio] v1.18.1 database   Jim Kunowsky
• [Flexradio] v1.18.1 PTT ticked off   Burt
• [Flexradio] v1.18.1 database   Tim Ellison
• [Flexradio] 1.18.1 calibration error   Gerald Youngblood
• [Flexradio] Processor   Dave Gomberg
• [Flexradio] mobile sdr and a complete spectrum display   Tim Ellison
• [Flexradio] PowerSDR1.18.1 startup error   Tim Ellison
• [Flexradio] CRT monitor RFI and Host error   Dudley Hurry
• [Flexradio] v1.18.1 database   Ray Andrews, K9DUR
• [Flexradio] Processor   Jack Haverty
• [Flexradio] All using SVN 3166 or higher   Mark Gang
• [Flexradio] Processor   Gerald Youngblood
• [Flexradio] PowerSDR(TM) v1.8.1 Official Release   Dan Eisenman
• [Flexradio] All using SVN 3166 or higher   Mark Gang
• [Flexradio] don't worry guys I saved the Flex   FireBrick
• [Flexradio] don't worry guys I saved the Flex   Neal Campbell
• [Flexradio] New 1.18.1   Dale Brown
• [Flexradio] Anyone using a wireless mic/headset?   FireBrick
• [Flexradio] Anyone using a wireless mic/headset?   Neal Campbell
• [Flexradio] Anyone have Skimmer working with filters smaller than 100hz?   vtnn43e at comcast.net
• [Flexradio] [OT] don't worry guys I saved the Flex   Tim Ellison
• [Flexradio] [SPAM] Anyone using a wireless mic/headset?   Tim Ellison
• [Flexradio] Anyone have Skimmer working with filters smaller than 100hz?   Tim Ellison
• [Flexradio] Anyone using a wireless mic/headset?   Tim Ellison
• [Flexradio] mobile sdr and a complete spectrum display   Jack Haverty
• [Flexradio] Anyone have Skimmer working with filters smaller than 100hz?   FireBrick
• [Flexradio] CQ WW contest has a new category, XTREME   Bob McGwier
• [Flexradio] mobile sdr and a complete spectrum display   kr7o at vhfdx.com
• [Flexradio] 5000a temp   STORMYX
• [Flexradio] 5000A temp   STORMYX
• [Flexradio] 5000a temp   Tim Ellison
• [Flexradio] mobile sdr and a complete spectrum display   Jack Haverty
• [Flexradio] PowerSDR(TM) v1.8.1 Official Release   Robert Jefferis
• [Flexradio] 2nd round of storms moving in   FireBrick
• [Flexradio] Windows 7 beta - Flex firewire driver defaults to 48000   David Decoons
• [Flexradio] President   Burt
• [Flexradio] Windows 7 beta - Flex firewire driver defaults to 48000   Tim Ellison
• [Flexradio] President   Jim Jerzycke
• [Flexradio] President   Jesse N4BFD
• [Flexradio] FlexRadio 3000   Brian Morgan
• [Flexradio] Windows 7 beta - Flex firewire driver defaults to 48000   Dave
• [Flexradio] Windows 7 beta - Flex firewire driver defaults to 48000   Tim Ellison
• [Flexradio] 2nd round of storms moving in   BILL GUYGER
• [Flexradio] Flex Radio 3000 or 5000   Dave Archer
• [Flexradio] Flex Radio 3000 or 5000   Dudley Hurry
• [Flexradio] All using SVN 3166 or higher   Jack Haverty
• [Flexradio] Flex Radio 3000 or 5000   Brian Lloyd
• [Flexradio] 2nd round of storms moving in   Mark Lunday
• [Flexradio] New 1.18.1   kr7o at vhfdx.com
• [Flexradio] [SPAM] Anyone using a wireless mic/headset?   Bret Mills
• [Flexradio] [SPAM] Anyone using a wireless mic/headset?   Mack
• [Flexradio] PowerSDR 18.1   charles at signer.com
• [Flexradio] All using SVN 3166 or higher   Brahmangou at aol.com
• [Flexradio] All using SVN 3166 or higher   Kirk K6KAR
• [Flexradio] New Flex 3000 - RF Issues   Harold Rosee
• [Flexradio] New Flex 3000 - RF Issues   Burt
• [Flexradio] New Flex 3000 - RF Issues   k4elo at fastmail.fm
• [Flexradio] [SPAM] New Flex 3000 - RF Issues   Tim Ellison
• [Flexradio] All using SVN 3166 or higher   Tim Ellison
• [Flexradio] Windows 7 beta - Flex firewire driver defaults to48000 solved   Dave
• [Flexradio] How to use the recorder   Steven O'Neal
• [Flexradio] [SPAM] How to use the recorder   Tim Ellison
• [Flexradio] Flex-3000 and PACTOR-III?   Gary Strong
• [Flexradio] Windows 7 beta - Flex firewire driver defaults to48000 solved   Brian Lloyd
• [Flexradio] New Flex 3000 - RF Issues   Dan Eisenman
• [Flexradio] New Flex 3000 - RF Issues   Brian Lloyd
• [Flexradio] PowerSDR1.18.1 startup error   Steve Kallal
• [Flexradio] New Flex 3000 - RF Issues   Simon (HB9DRV)
• [Flexradio] All using SVN 3166 or higher   Jack Haverty
• [Flexradio] Flex 5000 orientation   Brian Lloyd
• [Flexradio] Flex 5000 orientation   Geep Howell
• [Flexradio] Flex-3000 and PACTOR-III?   Brian Lloyd
• [Flexradio] Blue light   STORMYX
• [Flexradio] Fw: Extra 6 M Preamp....   Pete M
• [Flexradio] Flex 5000 orientation   Brian Lloyd
• [Flexradio] Blue Light special   FireBrick
• [Flexradio] Flex3000 / Remote / Vac / Ipsound   jmbord at teaser.fr
• [Flexradio] V1.18.1   jmbord at teaser.fr
• [Flexradio] Flex-3000 and PACTOR-III?   Gary Strong
• [Flexradio] Flex-3000 and PACTOR-III?   Brian Lloyd
• [Flexradio] PowerSDR1.18.1 startup error   Bob McGwier
• [Flexradio] Flex-3000 and PACTOR-III?   Ray Andrews, K9DUR
• [Flexradio] Flex-3000 and PACTOR-III?   Brian Lloyd
• [Flexradio] Flex-3000 and PACTOR-III?   Ray Andrews, K9DUR
• [Flexradio] Flex-3000 and PACTOR-III?   Brian Lloyd
• [Flexradio] Flex-3000 and PACTOR-III?   Tim Ellison
• [Flexradio] 1.18.1 Audio Limiting   Frank Mayer
• [Flexradio] Flex 5000 orientation   Jim Barber
• [Flexradio] 6 meter preamp   N4PY2
• [Flexradio] 6 meter preamp   Bob Tracy
• [Flexradio] FW: 6 meter preamp   Ed White WA3BZT
• [Flexradio] 1.18.1 Audio Limiting   Frank Mayer
• [Flexradio] headsets   Harry Hahn
• [Flexradio] FW: 6 meter preamp   Geep Howell
• [Flexradio] Flex-3000 and PACTOR-III?   Tim Ellison
• [Flexradio] 1.18.1 Audio Limiting   Tim Ellison
• [Flexradio] [SPAM] 6 meter preamp   Tim Ellison
• [Flexradio] Powering PW-1 Amp?   Howard S. White
• [Flexradio] Fw: Powering PW-1 Amp?   Dave
• [Flexradio] Fwd: Flex-3000 and PACTOR-III?   Stephen Hicks, N5AC
• [Flexradio] More on RFI issues   Harold Rosee
• [Flexradio] Windows 7 beta - Flex firewire driver defaults to48000 solved   Dave Gomberg
• [Flexradio] More on RFI issues   Steven O'Neal
• [Flexradio] Flex-3000 and PACTOR-III?   Gary Strong
• [Flexradio] 1.18.1 Audio Limiting   Frank Mayer
• [Flexradio] Would like to try a Griffin Powermate   NZ8J
• [Flexradio] More on RFI issues   George Steube
• [Flexradio] More on RFI issues   Howard S. White
• [Flexradio] More on RFI issues   Neal Campbell
• [Flexradio] More on RFI issues   Tim (W4TME)
• [Flexradio] Fwd: Flex-3000 and PACTOR-III?   Gary Strong
• [Flexradio] Fwd: Flex-3000 and PACTOR-III?   Stephen Hicks, N5AC
• [Flexradio] More on RFI issues   Ray Andrews, K9DUR
• [Flexradio] 6 Meter Preamps   Larry Savage
• [Flexradio] More on RFI issues   Bret Mills
• [Flexradio] More on RFI issues   Lee A Crocker
• [Flexradio] 6 Meter Preamps   Jim R
• [Flexradio] Why An Extra Pre Amp On Six Meters   Dan Eisenman
• [Flexradio] Why An Extra Pre Amp On Six Meters   Clay W7CE
• [Flexradio] SDR-1000 for sale   Dennis Petrich
• [Flexradio] More on RFI issues   Harold Rosee
• [Flexradio] 6 Meter Preamps   Ray J
• [Flexradio] 6 Meter Preamps   Kevin Hobbs
• [Flexradio] Flex 5000 orientation   Robert Jefferis
• [Flexradio] More on RFI issues   Ed Haskell
• [Flexradio] Would like to try a Griffin Powermate   NZ8J
• [Flexradio] Flex 5000 orientation   Tim (W4TME)
• [Flexradio] Fwd: Flex-3000 and PACTOR-III?   Gary Strong
• [Flexradio] Flex 5000 orientation   Jesse N4BFD
• [Flexradio] 1.18.1 Audio Limiting   Bob McGwier
• [Flexradio] 1.18.1 Audio Limiting   Bob McGwier
• [Flexradio] 1.18.1 Audio Limiting   Bob McGwier
• [Flexradio] Remote Operation Flex-5000A   Bill Gipps
• [Flexradio] 1.18.1 Audio Limiting   Robert Jefferis
• [Flexradio] Remote Operation Flex-5000A   lwloen at myclearwave.net
• [Flexradio] Fwd: Flex-3000 and PACTOR-III?   Brian Lloyd
• [Flexradio] Remote Operation Flex-5000A   Ken N9VV
• [Flexradio] All using SVN 3166 or higher   Carl, WCØV
• [Flexradio] More on RFI issues   Brian Lloyd
• [Flexradio] More on RFI issues   Robert Jefferis
• [Flexradio] RF Problems - Thanks again for all the help   Harold Rosee
• [Flexradio] Remote Operation Flex-5000A   Brian Lloyd
• [Flexradio] RF Problems - Thanks again for all the help   Steven O'Neal
• [Flexradio] 1.18.1 Audio Limiting   EB4APL
• [Flexradio] RF Problems - Thanks again for all the help   Jack Haverty
• [Flexradio] The PACTOR modem interfacing KC article has been published   Tim (W4TME)
• [Flexradio] re Orientation of the Flex.   Jim KJ7S
• [Flexradio] Flex 5000a to PW-1   Ed Helms
• [Flexradio] Flex 5000a to PW-1   Howard S. White
• [Flexradio] Trick for powering on the FLEX-5000 remotely   Tim (W4TME)
• [Flexradio] 1.18.1 Audio Limiting   Robert Jefferis
• [Flexradio] It Works!! No more RFI*****************   Harold Rosee
• [Flexradio] 6m Preamp....   Pete M
• [Flexradio] It Works!! No more RFI*****************   Tim (W4TME)
• [Flexradio] 1.18.1 Audio Limiting   Frank Mayer
• [Flexradio] [SPAM] 6 Meter Preamps   Tim Ellison
• [Flexradio] RFI fix...   Barry Jablonski
• [Flexradio] Space Navigator support   Alan NV8A
• [Flexradio] Problems with AM reception in version 18.1   Tim Lemmon
• [Flexradio] It Works!! No more RFI*****************   Larry da Ponte
• [Flexradio] It Works!! No more RFI*****************   Tim Ellison
• [Flexradio] It Works!! No more RFI*****************   Larry da Ponte
• [Flexradio] Audio on the FLEX-3000   Tim Ellison
• [Flexradio] Audio on the FLEX-3000   Jim Barber
• [Flexradio] [SPAM] 6 Meter Preamps   Larry da Ponte
• [Flexradio] Flex 5000 orientation   kr7o at vhfdx.com
• [Flexradio] It Works!! No more RFI*****************   Brian Lloyd
• [Flexradio] [SPAM] 6 Meter Preamps   Tim Ellison
• [Flexradio] Audio on the FLEX-3000   Tim Ellison
• [Flexradio] Space Navigator support   Edward Russell
• [Flexradio] It Works!! No more RFI*****************   Lee A Crocker
• [Flexradio] Good News on Remoting the 5K   Harryhahn at aol.com
• [Flexradio] Good News on Remoting the 5K   FireBrick
• [Flexradio] Good News on Remoting the 5K   Neal Campbell
• [Flexradio] Why An Extra Pre Amp On Six Meters   Dan Eisenman
• [Flexradio] All using SVN 3166 or higher   Gerald Youngblood
• [Flexradio] All using SVN 3166 or higher   Gerald Youngblood
• [Flexradio] FS/FT: Flex radio SDR-1000 Package   k7xq at elite.net
• [Flexradio] Audio on the FLEX-3000   Brian Lloyd
• [Flexradio] Space Navigator support   Robert Bajuk
• [Flexradio] Space Navigator support   Edward Russell
• [Flexradio] FlexRadio Digest, Vol 50, Issue 22 5000C   W4ABW at aol.com
• [Flexradio] FlexRadio Digest, Vol 50, Issue 22 5000C   Mike Naruta
• [Flexradio] FlexRadio Digest, Vol 50, Issue 22 5000C   Tim Ellison
• [Flexradio] PowerSDR 1.18.1 Release notes   Tim Ellison
• [Flexradio] PowerSDR 1.18.1 AGC-T lag   Jack Haverty
• [Flexradio] RX2/VAC   kr7o at vhfdx.com
• [Flexradio] 50MHz Pream   Bill Tynan
• [Flexradio] PowerSDR 1.18.1 Release notes   Joe - AB1DO
• [Flexradio] PowerSDR 1.18.1 Release notes   roland etienne
• [Flexradio] Fw: Re: PowerSDR 1.18.1 Release notes   keeganrh at juno.com
• [Flexradio] v1.18.1 PTT ticked off   Burt
• [Flexradio] PowerSDR 1.18.1 AGC-T lag   Bob McGwier
• [Flexradio] RX2/VAC   Robert Bajuk
• [Flexradio] RX2/VAC   Jerry Flanders
• [Flexradio] PowerSDR 1.18.1 AGC-T lag   Jack Haverty
• [Flexradio] PowerSDR 1.18.1 AGC-T lag   N4PY2
• [Flexradio] Splitting the reflector? I think it's a bad idea.   gelatinous at juno.com
• [Flexradio] Strange "noise"   Dave Gomberg
• [Flexradio] RX2/VAC   Edward Russell
• [Flexradio] Splitting the reflector? I think it's a bad idea.   Ray J
• [Flexradio] [SPAM] 6 Meter Preamps   Ray J
• [Flexradio] RX2/VAC   Jerry Flanders
• [Flexradio] Connecting an amplifier   William MacCracken
• [Flexradio] Antenna Selection   Kevin Hobbs
• [Flexradio] Splitting the reflector? I think it's a bad idea.   gelatinous at juno.com
• [Flexradio] PSDR Locks Up   Bill Tynan
• [Flexradio] PSDR Locks Up   Jim Jerzycke
• [Flexradio] RX2/VAC   Jerry Flanders
• [Flexradio] Fw: Re: PowerSDR 1.18.1 Release notes   Ahti Aintila
• [Flexradio] Splitting the reflector? I think it's a bad idea.   gelatinous at juno.com
• [Flexradio] Splitting the reflector? I think it's a bad idea.   Gerald Youngblood
• [Flexradio] Splitting the reflector? I think it's a bad idea.   Ross Stenberg
• [Flexradio] Splitting the reflector? I think it's a bad idea.   Bob McGwier
• [Flexradio] Splitting the reflector? I think it's a bad idea.   Ross Stenberg
• [Flexradio] OT   Ross Stenberg
• [Flexradio] OT   N4PY2
• [Flexradio] OT   Bob Tracy
• [Flexradio] [SPAM] Re: OT   Tim Ellison
• [Flexradio] Email Reflector   Doug McCormack
• [Flexradio] [SPAM] Re: OT   N4PY2
• [Flexradio] [SPAM] Re: OT   Pete M
• [Flexradio] [SPAM] Re: OT   Ross Stenberg
• [Flexradio] Email Reflector   Rick Markey, KN3C
• [Flexradio] Email Reflector   Howard S. White
• [Flexradio] OT   Terry Fox
• [Flexradio] OT   Bob McGwier
• [Flexradio] OT   Bob McGwier
• [Flexradio] OT   FireBrick
• [Flexradio] OT   Geep Howell
• [Flexradio] OT   Geep Howell
• [Flexradio] OT   Dr. Howard S. White
• [Flexradio] OT   Sanger, Joseph
• [Flexradio] OT   Ross Stenberg
• [Flexradio] OT   N4PY2
• [Flexradio] OT   k5nwa
• [Flexradio] Question on REC/PLAY   Harold Rosee
• [Flexradio] Question on REC/PLAY   Scott Chrestman
• [Flexradio] OT   NU8Z
• [Flexradio] OT   Jerry Harley
• [Flexradio] Question on REC/PLAY   Dudley Hurry
• [Flexradio] OT   Brian Lloyd
• [Flexradio] OT   Jim Jerzycke
• [Flexradio] OT   Brian Lloyd
• [Flexradio] OT   Sanger, Joseph
• [Flexradio] OT   MILLER, Tom
• [Flexradio] OT + non-OT   petervn at hetnet.nl
• [Flexradio] OT   David Beumer W0DHB
• [Flexradio] OT   Sanger, Joseph
• [Flexradio] OT   N4PY2
• [Flexradio] [SPAM] Re: OT   K4MDD at aol.com
• [Flexradio] OT   Jim Jerzycke
• [Flexradio] OT   NU8Z
• [Flexradio] OT   Jim Jerzycke
• [Flexradio] OT   Terry Fox
• [Flexradio] Interfacing Logging Program with the FLEX5000C   Joseph White
• [Flexradio] Interfacing Logging Program with the FLEX5000C   Tim Ellison
• [Flexradio] Interfacing Logging Program with the FLEX5000C   Jack Haverty
• [Flexradio] Microsoft .NET Framework requirements for Pwr SDR 1.8.0   Robert Jefferis
• [Flexradio] Microsoft .NET Framework requirements for Pwr SDR 1.8.0   Tim Ellison
• [Flexradio] OT   Brad A. Steffler
• [Flexradio] OT   Jim R
• [Flexradio] OT   Jim R
• [Flexradio] OT   Jim R
• [Flexradio] OT   Sanger, Joseph
• [Flexradio] OT   Kirk K6KAR
• [Flexradio] OT   k5nwa
• [Flexradio] OT   icstars at comcast.net
• [Flexradio] OT   Tim Ellison
• [Flexradio] Calling for EU FLEXER at HAMRADIO 2009   Giuseppe Campana
• [Flexradio] Microphones   FF Jason Greene
• [Flexradio] Microphones   MILLER, Tom
• [Flexradio] Microsoft .NET Framework requirements for Pwr SDR 1.8.0   Joe - AB1DO
• [Flexradio] Microsoft .NET Framework requirements for Pwr SDR 1.8.0   Tim Ellison
• [Flexradio] Microphones   Tim Ellison
• [Flexradio] Microphones   k4elo at fastmail.fm
• [Flexradio] Microphones   Bob Tracy
• [Flexradio] OT   Al Groff, K0VM
• [Flexradio] OT   Tim Ellison
• [Flexradio] Microphones   Doug McCormack
• [Flexradio] OT   Kirk K6KAR
• [Flexradio] RX2 direct I/Q output to VAC   Edward Russell
• [Flexradio] OT-disagree   Burt
• [Flexradio] OT   Burt
• [Flexradio] flex 3000 svn and the program   elan paim
• [Flexradio] OT   Jim Manner
• [Flexradio] OT   Tim Ellison
• [Flexradio] RX2 direct I/Q output to VAC   Tim Ellison
• [Flexradio] Microphones   Brian Lloyd
• [Flexradio] RX2 direct I/Q output to VAC   Lee A Crocker
• [Flexradio] RX2 direct I/Q output to VAC   Jerry Flanders
• [Flexradio] RX2 direct I/Q output to VAC   Edward Russell
• [Flexradio] RX2 direct I/Q output to VAC   Edward Russell
• [Flexradio] RX2 direct I/Q output to VAC   Tim Ellison
• [Flexradio] OT   Terry Fox
• [Flexradio] RX2 direct I/Q output to VAC   W5UN
• [Flexradio] RX2 direct I/Q output to VAC   Jerry Flanders
• [Flexradio] RX2 direct I/Q output to VAC   Jerry Flanders
• [Flexradio] RX2 direct I/Q output to VAC   Tim Ellison
• [Flexradio] OT   Mark Whatley
• [Flexradio] OT   Jeremy McNamara
• [Flexradio] RX2 direct I/Q output to VAC   Brian Lloyd
• [Flexradio] SDRDataTransfer Version 2.0   Ray Andrews, K9DUR
• [Flexradio] Microphones   Steven O'Neal
• [Flexradio] RX2 direct I/Q output to VAC   W5UN
• [Flexradio] Microphones   Bret Mills
• [Flexradio] PW1 interface info   Joseph White
• [Flexradio] Microsoft .NET Framework requirements for Pwr SDR 1.8.0   Robert Jefferis
• [Flexradio] Fldigi   Joseph White
• [Flexradio] PW1 interface info   Tim Ellison
• [Flexradio] Why An Extra Pre Amp On Six Meters   Clay W7CE
• [Flexradio] Microsoft .NET Framework 3.5 SP1 and PowerSDR 1.16.1   Clay W7CE
• [Flexradio] Fldigi   Tim Ellison
• [Flexradio] [SPAM] Microsoft .NET Framework 3.5 SP1 and PowerSDR 1.16.1   Tim Ellison
• [Flexradio] Microsoft .NET Framework 3.5 SP1 and PowerSDR 1.16.1   Ray Andrews, K9DUR
• [Flexradio] Microsoft .NET Framework 3.5 SP1 and PowerSDR 1.16.1   Robert Jefferis
• [Flexradio] Fldigi   Dave Gomberg
• [Flexradio] Fldigi   Brian Lloyd
• [Flexradio] PowerSDR and Digital Modes Overview (was Fldigi)   Peter G. Viscarola
• [Flexradio] PowerSDR and Digital Modes Overview (was Fldigi)   John Sweeney
• [Flexradio] PowerSDR and Digital Modes Overview (was Fldigi)   Tim Ellison
• [Flexradio] PowerSDR and Digital Modes Overview (was Fldigi)   Jerry Flanders
• [Flexradio] Power SDR 1.18/vCOM questions   Mark Lunday
• [Flexradio] Power SDR 1.18/vCOM questions   Jerry Flanders
• [Flexradio] Power SDR 1.18/vCOM questions   Dudley Hurry
• [Flexradio] PowerSDR and Digital Modes Overview (was Fldigi)   Brian Lloyd
• [Flexradio] Upgraded to 18.1 but now no PSK31   rich kennedy
• [Flexradio] Preamps for 6 meters....   Pete M
• [Flexradio] ddUtil issues?   Geep Howell
• [Flexradio] ddUtil issues?   Geep Howell
• [Flexradio] A quick question about MixW and SDR 1.18   Mark Lunday
• [Flexradio] Upgraded to 18.1 but now no PSK31   David Beumer W0DHB
• [Flexradio] A quick question about MixW and SDR 1.18   David Beumer W0DHB
• [Flexradio] ddUtil Problem fixed -- cockpit error...   Geep Howell
• [Flexradio] Apple bashing   Brian Lloyd
• [Flexradio] Apple bashing   Tom Thompson
• [Flexradio] Using DM780 to send CW with PowerSDR still an issue?   Gary Mackey
• [Flexradio] OT Re: Apple bashing   Bob McGwier
• [Flexradio] SDR-1000   ejespers at on7un.net
• [Flexradio] (no subject)   Joseph White
• [Flexradio] (no subject)   Tim Ellison
• [Flexradio] Primary buffer size   Lynn Willoughby
• [Flexradio] [SPAM] Primary buffer size   Tim Ellison
• [Flexradio] Question about SDR 1.8, waterfall, and RX PRE/ATTN settings   Mark Lunday
• [Flexradio] New F3K owner, 72 hours into receiving the rig   Mark Lunday
• [Flexradio] Question about SDR 1.8, waterfall, and RX PRE/ATTN settings   Tim Ellison
• [Flexradio] Question about SDR 1.8, waterfall, and RX PRE/ATTN settings   Eric Wachsmann
• [Flexradio] Question about SDR 1.8, waterfall, and RX PRE/ATTN settings   kr7o at vhfdx.com
• [Flexradio] No audio on Balanced input   Ed Helms
• [Flexradio] No audio on Balanced input   Barry Jablonski
• [Flexradio] DOES ANYONE KNOW W1FJ   FireBrick
• [Flexradio] Waiting for the new F5KA   Bill Nicolson
• [Flexradio] [SPAM] Waiting for the new F5KA   Tim Ellison
• [Flexradio] Help   Joseph White
• [Flexradio] SDR 1.8.1 and WSJT not playing nice   Mark Lunday
• [Flexradio] F3K and 6 meters   Mark Lunday
• [Flexradio] F3K and 6 meters   Ross Stenberg
• [Flexradio] 6 meters recieve on 5000   Ed Helms
• [Flexradio] flex 5000 laptop operation with windows 7   Jim
• [Flexradio] flex 5000 laptop operation with windows 7   Dave
• [Flexradio] 6 meters recieve on 5000   Dennis Petrich
• [Flexradio] 6 meters recieve on 5000   Kevin Hobbs
• [Flexradio] 6 meters recieve on 5000   Bob McGwier
• [Flexradio] 6 meters receive on 5000   Clay W7CE
• [Flexradio] 6 meters recieve on 5000   Dennis Petrich
• [Flexradio] For Sale HP Z3801A GPS   Gary Crabtree
• [Flexradio] Why a 6Meter Preamp Is Needed   Larry Savage
• [Flexradio] Why a 6Meter Preamp Is Needed   Dennis Petrich
• [Flexradio] 6 meters recieve on 5000   Duane - N9DG
• [Flexradio] SDR 1.8.1 and WSJT not playing nice   Mark Lunday
• [Flexradio] 6 meters recieve on 5000   Philip M. Lanese
• [Flexradio] 6 meters recieve on 5000   Simon (HB9DRV)
• [Flexradio] SDR 1.8.1 and WSJT not playing nice   Tim Ellison
• [Flexradio] 6 meters receive on 5000   Tim Ellison
• [Flexradio] 6 meters receive on 5000   Lee A Crocker
• [Flexradio] Quickplay Rec/Play files sound like static   Gary Mackey
• [Flexradio] F3K Shiptime, comments on Flex-3000   gelatinous at juno.com
• [Flexradio] F3K Shiptime, comments on Flex-3000   gelatinous at juno.com
• [Flexradio] Quickplay Rec/Play files sound like static   Larry da Ponte
• [Flexradio] 6 meters receive on 5000   Mark Lunday
• [Flexradio] SDR 1.8.1 and WSJT not playing nice   Mark Lunday
• [Flexradio] F3K Shiptime, comments on Flex-3000   Tim Ellison
• [Flexradio] High SWR - how protected is the F3K?   Mark Lunday
• [Flexradio] I made a few more...   Pete M
• [Flexradio] 160 meter filter RE: F3K Shiptime, comments on Flex-3000   vtnn43e at comcast.net
• [Flexradio] 6 meters receive on 5000   Ross Stenberg
• [Flexradio] Why An Extra Pre Amp On Six Meters   Dan Eisenman
• [Flexradio] 6 meters receive on 5000   Lee A Crocker
• [Flexradio] Some notes on SDR 1.8.1 vs 1.8.0   Mark Lunday
• [Flexradio] Some notes on SDR 1.8.1 vs 1.8.0   Tim Ellison
• [Flexradio] Some notes on SDR 1.8.1 vs 1.8.0   Mark Lunday
• [Flexradio] 5000A es writelog   STORMYX
• [Flexradio] VAC Config   Jason Greene
• [Flexradio] Locking vfo's and declexia or however it is spelled   MILLER, Tom
• [Flexradio] RF disappearing on 20 meters during FD   Geep Howell
• [Flexradio] Fwd: For Sale HP Z3801A GPS   Gary Crabtree
• [Flexradio] Some notes on SDR 1.8.1 vs 1.8.0   Tim Ellison
• [Flexradio] Locking vfo's and dyslexia or however it is spelled   Tim Ellison
• [Flexradio] VAC Config   Tim Ellison
• [Flexradio] Give thanks   herbert3 at centurytel.net
• [Flexradio] any help please flex3000   elan paim
• [Flexradio] any help please flex3000   Mike Naruta
• [Flexradio] any help please flex3000   FireBrick
• [Flexradio] (no subject)   gelatinous at juno.com
• [Flexradio] any help please flex3000   FireBrick
• [Flexradio] Quickplay Rec/Play files sound like static   John Hansen
• [Flexradio] RF Preamp in SDR-1000   Rod Brink
• [Flexradio] RF Preamp in SDR-1000   Mike Naruta
• [Flexradio] Quickplay Rec/Play files sound like static   Dudley Hurry
• [Flexradio] 3000 - Need a little more help please   Harold Rosee
• [Flexradio] [SPAM] 3000 - Need a little more help please   Tim Ellison
• [Flexradio] [SPAM] 3000 - Need a little more help please   Harold Rosee
• [Flexradio] [SPAM] 3000 - Need a little more help please   Harold Rosee
• [Flexradio] Flex 3000 and Field Day   Bret Mills
• [Flexradio] receiver behavior when operating off of emergency generator   Jim
• [Flexradio] Automatic Gain Control Threshold "AGC-T" versus reality   Robert Jefferis
• [Flexradio] Automatic Gain Control Threshold "AGC-T" versus reality   Tim Ellison
• [Flexradio] [SPAM] 3000 - Need a little more help please   Dudley Hurry
• [Flexradio] Flex 3000 and Field Day   Dudley Hurry
• [Flexradio] receiver behavior when operating off of emergencygenerator   Howard S. White
• [Flexradio] receiver behavior when operating off of emergencygenerator   Jim Manner
• [Flexradio] receiver behavior when operating off of emergencygenerator   Jim Jerzycke
• [Flexradio] 3000 - Need a little more help please   TOM BLACKWELL (nt)
• [Flexradio] Computer Question   Richard W. Solomon
• [Flexradio] receiver behavior when operating off ofemergencygenerator   Howard S. White
• [Flexradio] Automatic Gain Control Threshold "AGC-T" versus reality   Bob McGwier
• [Flexradio] Preamp on Flex 3000 makes radio go deaf   Al Konschak
• [Flexradio] Computer Question   Tim Ellison
• [Flexradio] [SPAM] 3000 - Need a little more help please   Ray Andrews, K9DUR
• [Flexradio] receiver behavior when operating off of emergencygenerator   Ray Andrews, K9DUR
• [Flexradio] Sound card questions   Mark Whatley
• [Flexradio] Automatic Gain Control Threshold "AGC-T" versus reality   Robert Jefferis
• [Flexradio] Sound card questions   Dave
• [Flexradio] Sound card questions   Ray Andrews, K9DUR
• [Flexradio] Automatic Gain Control Threshold "AGC-T" versus reality   Robert Jefferis
• [Flexradio] Sound card questions   Tim Ellison
• [Flexradio] Sound cards   Mark Whatley
• [Flexradio] Sound card questions   Jack Haverty
• [Flexradio] Sound cards   Tim Ellison
• [Flexradio] Preamp gain on RX2 In   Clay W7CE
• [Flexradio] Flex 3000 and Field Day   Mack
• [Flexradio] Computer Question   Dave Gomberg
• [Flexradio] Sound card questions   Ray Andrews, K9DUR
• [Flexradio] Preamp gain on RX2 In   FireBrick
• [Flexradio] [SPAM] 3000 - Need a little more help please   Harold Rosee
• [Flexradio] Automatic Gain Control Threshold "AGC-T" versus reality   Lee A Crocker
• [Flexradio] SGC SG-500 amp for sale   radioart at frontiernet.net
• [Flexradio] Automatic Gain Control Threshold "AGC-T" versus reality   Joe - AB1DO
• [Flexradio] Automatic Gain Control Threshold "AGC-T" versusreality   Tayloe Dan-P26412
• [Flexradio] Field Day and the Flex 5000A   Geep Howell
• [Flexradio] Automatic Gain Control Threshold "AGC-T" versusreality   Lee A Crocker
• [Flexradio] Preamp on Flex 3000 makes radio go deaf   Jesse N4BFD
• [Flexradio] Automatic Gain Control Threshold "AGC-T" versus reality   Bob McGwier
• [Flexradio] [SPAM] 3000 - Need a little more help please   kwwalla at hotmail.com
• [Flexradio] Automatic Gain Control Threshold "AGC-T" versus reality   Robert Jefferis
• [Flexradio] Connecting ordinary loudspeakers to the Flex 3000 and Flex 5000   Brian Lloyd
• [Flexradio] Final software version for SDR1000?   Ralph Bird
• [Flexradio] Final software version for SDR1000?   N4PY
• [Flexradio] [SPAM] Final software version for SDR1000?   Tim Ellison
• [Flexradio] Ref request for information on Software versions.   Ralph Bird
• [Flexradio] High SWR - how protected is the F3K?   Gerald Youngblood
• [Flexradio] Built in 2 meter transverter for the F5K   N4PY2
• [Flexradio] thanks for the thoughts about my noisy generator problem   Jim
• [Flexradio] thanks for the thoughts about my noisy generator problem   Tim Ellison
• [Flexradio] Built in 2 meter transverter for the F5K   Tim Ellison
• [Flexradio] SDR 1.8.1, hearing voices going out over digital mode (yes this sounds crazy...)   Mark Lunday
• [Flexradio] SDR 1.8.1, hearing voices going out over digital mode (yes this sounds crazy...)   Mark Lunday
• [Flexradio] [Fwd: de VK4AES]   Les Keppie
• [Flexradio] Tokyo Hy-Power   AB2CD
• [Flexradio] 3000 - Need a little more help please   Joze Kovacic
• [Flexradio] PS: 3000 - Need a little more help please   Joze Kovacic
• [Flexradio] Tokyo Hy-Power   Jim
• [Flexradio] [Fwd: de VK4AES]   Tim Ellison
• [Flexradio] PS: 3000 - Need a little more help please   Tim Ellison
• [Flexradio] Connecting ordinary loudspeakers to the Flex 3000 and Flex 5000   jmbord at teaser.fr
• [Flexradio] SDR 1.8.1, hearing voices going out over digital mode (yes this sounds crazy...)   Burt
• [Flexradio] Connecting ordinary loudspeakers to the Flex 3000 and Flex 5000   Burt
• [Flexradio] Connecting ordinary loudspeakers to the Flex 3000 and Flex 5000   herbert3 at centurytel.net
• [Flexradio] Preamp on Flex 3000 makes radio go deaf   Charles Redding
• [Flexradio] Connecting ordinary loudspeakers to the Flex 3000 and Flex 5000   Ray Andrews, K9DUR
• [Flexradio] Preamp on Flex 3000 makes radio go deaf   Tim (W4TME)
• [Flexradio] HM-5 Heil   STORMYX
• [Flexradio] Tokyo Hy-Power   Jerry Flanders
• [Flexradio] HM-5 Heil   Brian Lloyd
• [Flexradio] HM-5 Heil   Bret Mills
• [Flexradio] Tokyo Hy-Power   N4PY2
• [Flexradio] PTT switch   FireBrick
• [Flexradio] PTT switch   FireBrick
• [Flexradio] [Fwd: de VK4AES]   Jim Barber
• [Flexradio] PTT switch   Doug McCormack
• [Flexradio] How To Use "Frequency Calibration Improvements" in PSDR 1.18.1 ??   Steve Floyd
• [Flexradio] How To Use "Frequency Calibration Improvements" in PSDR 1.18.1 ??   Tim Ellison
• [Flexradio] PTT switch   Jim Jerzycke
• [Flexradio] PS: 3000 - Need a little more help please   Joze Kovacic
• [Flexradio] PTT switch   radioart at frontiernet.net
• [Flexradio] PTT switch   N4PY2
• [Flexradio] PTT switch   Jim Jerzycke
• [Flexradio] PS: 3000 - Need a little more help please   Joze Kovacic
• [Flexradio] PS: 3000 - Need a little more help please   Tim Ellison
• [Flexradio] 3k preamp   Harold Rosee
• [Flexradio] PS: 3000 - Need a little more help please   Joze Kovacic
• [Flexradio] 3k preamp   Larry da Ponte
• [Flexradio] PTT switch   Jim R
• [Flexradio] PTT switch   Jim Jerzycke
• [Flexradio] Command AMP - Flex5000   icstars at comcast.net
• [Flexradio] PTT switch   Jesse N4BFD
• [Flexradio] PTT switch   BILL GUYGER
• [Flexradio] .... remaining preamps for the Flex 5000a   Pete M
• [Flexradio] Preamp on Flex 3000 makes radio go deaf   Mark Lunday
• [Flexradio] 3k preamp   Harold Rosee
• [Flexradio] Tokyo Thank You   AB2CD
• [Flexradio] Flex 3000 use at Ontario (canada) Haqmfest.   R.Haighton
• [Flexradio] [Fwd: de VK4AES]   Dale Brown
• [Flexradio] Command AMP - Flex5000   Joe Roth-WC4R
• [Flexradio] external audio for the Flex 3000 and PTT issues.   Brian Morgan
• [Flexradio] Connecting ordinary loudspeakers to the Flex 3000 and Flex 5000   Burt
• [Flexradio] Using DM780 to send CW with PowerSDR still an issue?   Gary Mackey
• [Flexradio] PTT switch   Robert Jefferis
• [Flexradio] FS - PCI 1 serial, 1 parallel board   Dave

Last message date: Tue Jun 30 23:38:43 EDT 2009
Archived on: Tue Jun 30 23:44:39 EDT 2009

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...