[Flexradio] Second receiver shown on Flex-3000 PowerSDR screen

[Tim Ellison]

MultiRX, or two independent receive passbands are a feature of any FlexRadio Systems SDR regardless of hardware.  What is described here is a bug where the FLEX-5000 second PHYSICAL receiver controls are being shown on the console when a FLEX-3000 is the attached SDR hardware.  Those controls are not supposed to be shown, since there is no physical second receiver in the FLEX-3000. 

Check out MultiRX in the FLEX-3000 Owner's Manual (page 54) for a more detailed explanation of MultiRX.



-Tim

-----Original Message-----
From: flexradio-bounces at flex-radio.biz [mailto:flexradio-bounces at flex-radio.biz] On Behalf Of Mark Lunday
Sent: Tuesday, June 02, 2009 5:07 PM
To: 'Woodrick, Ed'; 'Scott Myers'; flexradio at flex-radio.biz
Subject: Re: [Flexradio] Second receiver shown on Flex-3000 PowerSDR screen

I was told when I looked into the F3K that this was a feature...spilt receivers on same band (sort of like a dual-watch).  Does not sound like a bug to me, or am I missing something?


Mark Lunday
WD4ELG
wd4elg at arrl.net
http://wd4elg.net

-----Original Message-----
From: flexradio-bounces at flex-radio.biz
[mailto:flexradio-bounces at flex-radio.biz] On Behalf Of Woodrick, Ed
Sent: Tuesday, June 02, 2009 10:14 AM
To: Scott Myers; flexradio at flex-radio.biz
Subject: Re: [Flexradio] Second receiver shown on Flex-3000 PowerSDR screen

Because if you turn it on, you get two receivers within the current segment being scanned. So you can listen on frequency as well as "up 10" 
You can't listen on two bands without the second receiver, or 200 kHz apart, but you can when they are closer to each other.

Ed WA4YIH

-----Original Message-----
From: flexradio-bounces at flex-radio.biz
[mailto:flexradio-bounces at flex-radio.biz] On Behalf Of Scott Myers
Sent: Tuesday, June 02, 2009 7:14 AM
To: flexradio at flex-radio.biz
Subject: [Flexradio] Second receiver shown on Flex-3000 PowerSDR screen

Why does my PowerSDR screen show a second receiver at the bottom?  I obviously don't have one on a Flex-3000.

 

Scott AC8DE

_______________________________________________
FlexRadio Systems Mailing List
FlexRadio at flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage:
http://www.flex-radio.com/

_______________________________________________
FlexRadio Systems Mailing List
FlexRadio at flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage:
http://www.flex-radio.com/


_______________________________________________
FlexRadio Systems Mailing List
FlexRadio at flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/