[Flexradio] no power out 6 m zero watts

Tim Ellison tellison at itsco.com
Fri Dec 4 18:47:47 EST 2009


100 watts PEP



-Tim

-----Original Message-----
From: k6xr at bak.rr.com [mailto:k6xr at bak.rr.com] 
Sent: Friday, December 04, 2009 6:00 PM
To: flexradio at flex-radio.biz; Ed Stallman; Tim Ellison
Subject: Re: [Flexradio] no power out 6 m zero watts

What should be the power out on 6m? I have always got about 36 watts out max on 6 and another friend with a 3000 also get about the same.

Reggie k6xr







---- Tim Ellison <tellison at itsco.com> wrote: 
> You have done everything correctly.  Contact Dudley directly at FlexRadio support (support at flex-radio.com) so he can triage the problem with 6m.
> 
> 
> 
> -Tim
> 
> -----Original Message-----
> From: flexradio-bounces at flex-radio.biz 
> [mailto:flexradio-bounces at flex-radio.biz] On Behalf Of Ed Stallman
> Sent: Friday, December 04, 2009 5:27 PM
> To: flexradio at flex-radio.biz
> Subject: [Flexradio] no power out 6 m zero watts
> 
> This happened when I updated SVN PB-Pal , My power on the HF bands went to 150 watts . I did the Ctrl Shift F to calibrate the power, all calibrated fine until it got to 6m . At that point PSDR would stop and shut down.
> 
> Reading the mail on the reflector, I read were all calibrating need's 
> to be done using the official release. Today I installed 
> Drivers,Firmware and PSDR from the Flex web page (front page) Doing 
> the power calibrate, all HF bands did fine, This time when it got to 
> 6m, it did not shut down PSDR ... It just sat there and did nothing, I 
> could see a wave form in the filter bandwidth and the Mox tab was 
> highlighted . I Gave it may be 5 minutes before clicking X and stop on 
> PSDR
> 
> I tried this with 2 different OS, windows XP home and Windows 7 32 
> bit. their was no change with either,
> 
> So were did my 100 watts go on 6m ?
> 
> Yes I was in 96k and 1024
> 
> Yes I used a dummy load on port one
> 
> yes it was a new data base
> 
> Radio Flex 5000a
> 
> Thanks for any help , Ed
> 
> 
> _______________________________________________
> FlexRadio Systems Mailing List
> FlexRadio at flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flex-radio.com/  Homepage: 
> http://www.flex-radio.com/ Message delivered to tellison at itsco.com
> 
> _______________________________________________
> FlexRadio Systems Mailing List
> FlexRadio at flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flex-radio.com/  Homepage: 
> http://www.flex-radio.com/ Message delivered to k6xr at bak.rr.com




More information about the FlexRadio mailing list